Certified Conformance Evaluator Program
Arranging a Third Party Verification Inspection
The TPV inspection is performed under an agreement between the Certified Conformance Evaluator (CCE) and the applicant. All fees and expenses for the inspection are to be established between these two parties. Contact information for all current CCEs is available in this CCE List.
About CCE Accreditation
The CCE program is an accreditation program administered by 3-A SSI. The CCE credential is a primary requirement for the performance of the TPV inspection of the hygienic design of equipment. The TPV inspection is a central requirement for 3-A Symbol authorization or any other voluntary 3-A SSI certificate program.
The CCE program is designed to enhance the integrity of the 3-A SSI programs by providing the industry with a register of professionals who have the appropriate qualifications, work experience and the demonstrated knowledge for evaluating and verifying equipment fabricated in accordance to 3-A Sanitary Standards, or processing systems manufactured and installed in accordance to 3-A Accepted Practices. The independent inspection programs of 3-A SSI provide assurance of hygienic equipment design and thereby benefits regulatory sanitarians, equipment fabricators, processors, and consumers.
The CCE brings substantial knowledge, experience and a valued professional reputation to this task. Individuals with the CCE designation have successfully completed a rigorous evaluation process. All CCEs have met specific criteria for basic education and industry experience in a setting where 3-A Sanitary Standards were applied. They have also demonstrated high verifiable work experience and high professional integrity. Every CCE has also passed a comprehensive written exam testing their knowledge of principles of sanitary equipment design for 3-A equipment, the ability to interpret engineering drawings pertaining to manufacturing equipment and instrumentation for the food processing industries, and the ability to review and evaluate complex processes. Download the CCE Application Form
Criteria for Certified Conformance Evaluators
Requirements for obtaining and maintaining the CCE credential are detailed in the publication ‘Criteria for Certified Conformance Evaluators’. See a complete copy of the current requirements at Criteria for Certified Conformance Evaluators.
These on-line CCE Bulletins have been approved by the TPV Coordinating Committee to support and assist the CCEs in performing uniform and reliable Third Party Verification (TPV) inspections. Click on the bulletin number for a complete copy of the text.
||Information for TPV cover page for online RPSCQC and Process Certificates
||The following guidance shall be used by the CCE when performing TPV evaluations. This guidance is effective immediately upon receipt and shall be used until revoked or included in an up-date of the TPV Manual. This guidance is to improve the usefulness of the certificates issued under the Replacement Parts and System Components Qualifications program (RPSCQC) and the 3-A Process Certification program
||TPV Evaluation of Plastic, Rubber and Rubber-like Materials
||The following guidance shall be used by CCE when performing TPV evaluations and provides additional criteria for the acceptance of non-metal materials.
||Model Numbers and Product Descriptions
||The following guidance shall be used by the CCE when performing TPV evaluations and provides guidance on appropriate unique model number designations.
||Meat and Poultry Standards Use
||The following guidance shall be used by the CCE when performing TPV evaluations of meat and poultry processing equipment covered by Standards ANSI/3-A/NSF 14159-1, ANSI/3-A/NSF 14159-2 or ANSI/3-A/NSF 14159-3. This guidance is effective immediately upon receipt and shall be used until revoked or included in an up-date of the TPV Manual.
||Proper use and reference to the General Requirements Standard, Number 00- in the application of the Replacement Parts and System Component Qualification Certificate Program (RPSCQC)
||The following guidance shall be used by the CCE when performing TPV evaluations. This guidance is effective immediately upon receipt and shall be used until revoked or included in an up-date of the TPV Manual.
||Information required for listing on 3-A Symbol authorization certificates relating to equipment covered by 3-A Standard 74-06 for Sensors And Sensor Fittings And Connections and proper inspection of potential voids behind seals and gaskets.
||Provides guidance to the CCEs on proper inspection of potential voids behind seals and gaskets.
||Information required for listing on 3-A Symbol authorization certificates relating to equipment covered by 3-A Standard 85-03 for Double-Seat Mixproof Valves.
||Provides guidance to the CCEs when performing TPV inspections and amending certificates with new information requirements.
||Identifying Hose Assemblies During TPV Evaluations
||Provides guidance to the CCEs when performing TPV inspections of hose assemblies under Standard 62- with emphasis on ensuring correct model number format and wording for consistency of equipment identification among the TPV reports.
|DIN Standard Fittings Compliance
||Provides guidance for CCEs to use when inspecting DIN Standard fittings for conformance to 3-A Sanitary Standards for Fittings and Connections, Number 63-.
||Handling Hybrid Equipment Designs
||Provides guidance on creative designs and processing technologies which produce items covered by multiple 3-A Sanitary Standards.
||Model Number Designations Acceptable for TPV Evaluations
||Provides guidance on the collection and listing of model information on the TPV Report for 3-A Symbol Authorization.
||Inspection of Permanently Welded Joints
||Provides guidance for joint welding standards for CCEs.
||Mechanical Force Seals in 3-A SSI Valve Standards
||Provides guidance on mechanical force seals in 3-A SSI valve standards for CCEs.
||Standard 02-10, Milk Pumps, Interpretation of Clause D22.214.171.124, Enclosed Threads
||Provides interpretive guidance on ‘cleanable’, ‘drainable’, and ‘validated’.
||Use of Non-referenced 3-A Sanitary Standards and 3-A Accepted Practices During TPV Evaluations
||Provides guidance on use of non-referenced 3-A Sanitary Standards and 3-A Accepted Practices.
||Evaluation of Rubber and Plastic Materials Using 3-A Standards 18- and 20- for a 3-A Symbol
||Applies to the evaluation of rubber, rubber-like and plastic materials for conformance with applicable 3-A Standard(s) for the purpose of authorizing a 3-A Symbol.
||Applicability of 3-A Standards 18- and 20- (Rubber and Plastic) in Processing Equipment
||Applies to the evaluation of rubber, rubber-like and plastic materials in equipment to be covered by a 3-A Symbol.
||Evaluation of Ceramic Material On Equipment With A 3-A Symbol
||Applies to the use of ceramic materials in equipment covered by a 3-A Symbol.
||Guidance on TPV Inspection Checklist
||Provides guidance on use of TPV Inspection checklist.
||Guidance on Materials Acceptability Criteria
||Provides guidance on silicon carbide, application of certain provisions of 3-A Standard 20-, and requirements for appurtenances.